Refill: Stripper & Degreaser Pack

Refill: Stripper & Degreaser Pack

Regular price $ 19.99 ♥ DIY Print Shop kits & products are hand-built in the USA by our awesome team in Vancouver, Washington
/
Shipping calculated at checkout.

Emulsion Remover & Screen Degreaser Pack Includes: Bottle of Emulsion Remover & 1 Bottle of Screen Degreaser

Concentrated - when mixed with water each will make up to 1 gallon. Use eco-friendly emulsion stripper to remove emulsion quickly and thoroughly. After the emulsion has been removed, use eco-friendly degreaser to remove contaminants left in the mesh, such as oils, dirt, and dust, after the emulsion has been removed. 

 

video note: exposure light seen in the GIG Poster video has since been replaced to a better, streamlined UV exposure light bulb

For more information about our screen printing inks, checkout the video above!

In addition to water-based ink, plastisol ink is now included in the Shop Kit and our New 4-Color Kit. The video above provides more information on the difference between the two inks.

Our inks are great for printing on a variety of substrates including: t-shirts, apparel/fabrics, canvas, paper, wood, glass, plexi, metal and more! Also, feel free to experiment with screen printing on anything you can think of, just remember that if it can lay flat, then it's likely that it can be screen printed!

Tips for drying/curing inks:

T-Shirts & Fabrics:

Easy Dry method: after the top layer of the ink is dry to the touch, put your printed t-shirts and/or fabrics in a dryer for 30-45 minutes on high heatParchment paper (included in your kit): heat up an iron, then place the parchment paper over your screen print, then simply turn your t-shirt inside out and iron the backside of the print. Slow Dry the air dry method: hang tees using a clothesline (inside or outside) let dry for a few hours. Speed Dry hair dryer method: use a hair dryer or heat gun and rapidly move over the print to cure the ink - we also highly suggest putting your t-shirts in the dryer after 45min on high heat. 

Paper or Wood:

Screen printing paper: simply print paper & let air dry, the ink should dry to the touch in minutes.

If screen printing wood, after the ink dries we recommend putting a clear sealer (polyurethane works great!) over the print, especially if it will be living outdoors.

Customer Reviews

No reviews yet Write a review